Low Voltage, Data and Telephone

INTRODUCTION

Where low voltage, data and telecom lines enter and exit the building, they must also be included in the Lightning Protection System. These include:

Electromagnetic shielding
Telephone lines
Data communication lines
Instrumentation, control, signalling lines
Coaxial lines for CCTV, TV, & antenna cables

Field based electronic equipment also needs to be protected.

Data, Signal and Telecomms

Coarse and fine surge protection for 2 core telecommunications and signalling networks.

KM-BDG-230-V/1-FR1 — KM-BDG-230-V/1-FR1

Surge arrester for data, signal and telecomms
Lightning current arrester with coarse and fine surge protection for the protection of 2 core signalling lines.

Install at the boundary of LPZ0 and LPZ1 zones at the line entry into the building.

KM-BDG-230-V/1-FR1 datasheet

KM-DM-048/1-RB — KM-DM-048/1-RB

Surge current arrester for data, signal and telecomms
Coarse and fine surge protection for 2 core telecommunications and signalling networks.

Use to protect RS-485 instrumentation and control lines, electronic security and fire detection systems.

Install close to equipment for protection of communication interfaces.

KM-DM-048/1-RB datasheet

Low Voltage Power

Surge protection device for all types of low voltage electric and electronic equipment rated up to 48 volts (nominal).

KM-DP-048-V/1-F16 — KM-DP-048-V/1-F16

Surge arrester for low voltage AC/DC power supplies
Surge protection device for all types of low voltage electric and electronic equipment rated up to 48 volts (nominal).

Install close to protected equipment in low voltage power circuits.

KM-DP-048-V/1-F16 datasheet

Signal Lines

Coarse and fine surge protection for 2 core signalling networks.

KM-DMG-024/1-RB — KM-DMG-024/1-RB

Two-stage surge current arrester for signal lines
Coarse and fine surge protection for 2 core signalling networks.

Install close to equipment for protection of communication interfaces.

KM-DMG-024/1-RB datasheet

KM-DM-006/1-RB — KM-DM-006/1-RB

Two-stage surge current arrester for RS485 signal lines
Coarse and fine surge protection for 2 core signalling networks.

Install close to equipment for protection of communication interfaces.

KM-DM-006/1-RB datasheet

Telephone

Use the Kingsmill KP series of products for telephone and signal line protection for signals utilising the KRONE™ LSA-PLUS® 10-way connection blocks.

KRONE protector — KRONE LSA-Plus® Telephone Signal Protection

Use the Kingsmill KP series of products for telephone and signal line protection.
For signals utilising the KRONE^TM LSA-PLUS® 10-way connection blocks.

KM-DL-TLF-HF — KM-DL-TLF-HF

Surge arrester for telephone lines – RJ11 sockets
Protect a single pair of high-speed analogue lines in telecommunication equipment (eg VDSL2).

Install inline for protection of telecommunication equipment on high-speed analogue lines.

KM-DL-TLF-HF datasheet

KM-DL-ISDN-RJ45 — KM-DL-ISDN-RJ45

Surge arrester for telephone lines – RJ45 sockets
Protect a single pair of ISDN lines in telecommunication equipment.

Install in front of NT for protection of telecommunication equipment on ISDN lines.

KM-DL-ISDN-RJ45 datasheet

Ethernet

Combination of coarse and fine protection of ethernet lines with Power over Ethernet (PoE). For protection of ethernet line Cat 6 with PoE Mode A, B against surge voltages.

KM-DL-1G-RJ45-PoE-AB — KM-DL-1G-RJ45-PoE-AB

Surge arrester for Power over Ethernet
Combination of coarse and fine protection of ethernet lines with Power over Ethernet (PoE).

For protection of ethernet line Cat 6 with PoE Mode A, B against surge voltages.

Install at the entry into the building and close to protected equipment, at the boundary of LPZ0 and LPZ1 or higher.

KM-DL-1G-RJ45-PoE-AB datasheet

KM-DL-CAT.6-60V — KM-DL-CAT.6-60V

Surge arrester for Ethernet
Combination of coarse and fine protection of ethernet lines with Power over Ethernet (PoE).

For protection of ethernet line Cat 6 with PoE Mode A, B against surge voltages.

Install close to protected equipment.

KM-DL-CAT.6-60V datasheet

Coaxial

Lightning current arrester for the protection of coaxial lines and telecommunication equipment.

KM-FX-090 F75 T F/F — KM-FX-090 F75 T F/F

Lightning current arrester for coaxial lines (F Connector)
Lightning current arrester with floating shielding (separated with GDT) for TV and CCTV coaxial line systems.

Install at the boundary of LPZ0 and LPZ1 zones at the line entry into the building.

KM-FX-090 F75 T F/F datasheet

KM-HX-090 N50 F/M — KM-HX-090 N50 F/M

Lightning current arrester for coaxial lines (N Connector)
Lightning current arrester for the protection of coaxial lines and telecommunication equipment against the impact of direct or indirect lightning strikes.

Suitable for combined and power supply installations.

KM-HX-090 N50 F/M datasheet