FITTINGS

INTRODUCTION

It is important to securely fix Conductors to the structure to be protected. Our range includes fixings for both roof and wall and are designed to suit most applications, as well as materials.

APPLICATIONS

CLICK HERE for FITTINGS applications

CLIPS

Metallic, non-metallic, adhesive, tape, one hole cable clips suitable for a wide range of conductors and for fixing to different surfaces.

BS EN 62305 Metallic DC Clips Flat conductor

BS:EN 62305 Metallic DC Clips (Flat conductor)

BS:EN 62305 Metallic DC Clips for securing lightning conductors to flat surfaces.

Material:

High Quality Copper Alloy/Aluminium

 

To request a quotation, select the version you require using the drop down options below.

Heavy Duty Metallic DC Clips Flat conductor MDC253 copperHeavy Duty Metallic DC Clips Flat conductor MDA253 Aluminium

Heavy Duty Metallic DC Clips (Flat conductor)

Heavy Duty Metallic DC Clips are suitable for use in Earthing and Lightning Protection applications.

Material:

High Copper Content Alloy/Gunmetal/Aluminium Alloys

STANDARD:

BS:EN 62561-4

 

To request a quotation, select the version you require using the drop down options below.

Heavy Duty Metallic Cable SaddlesHeavy Duty Metallic Cable Saddles b

Heavy Duty Metallic Cable Saddles

Heavy Duty Metallic Cable Saddles are suitable for use in both Lightning Protection and Earthing Systems.

Material:

High copper content alloy

 

To request a quotation, select the version you require using the drop down options below.

Non Metallic DC Clip Flat conductor

Non-Metallic DC Clips (Flat conductor)

Non-Metallic DC Clips are available in six colours to match bare and PVC copper and aluminium tapes.

Material:

UV Stabilised Polypropylene

Tightening torque:

8Nm

 

To request a quotation, select the version you require using the drop down options below.

Non Metallic DC Clips Circular push in type

Non-Metallic DC Clips (Circular – push in type)

One-piece Non-Metallic DC Clips are designed for ease of installation. They suit 8mm bare and PVC sheathed circular conductors and are UV stabilised to prevent degradation in cold weather conditions.

Material:

UV Stabilised Polypropylene

 

To request a quotation, select the version you require using the drop down options below.

Non Metallic DC Clips Circular wrap over typeNon Metallic DC Clips Circular wrap over type b

Non-Metallic DC Clips (Circular – wrap over type)

Wrap Over Type Clips are designed for ease of installation. They suit 8mm bare and PVC sheathed circular conductors.

Material:

UV Stabilised Polypropylene

 

To request a quotation, select the version you require using the drop down options below.

Adhesive Clips Flat conductor

Adhesive Clips (Flat conductor)

Adhesive Clips are used where no mechanical fixing method can be achieved or allowed. The base has a threaded hole and is supplied with a fixing screw to suit our Non-Metallic DC Clip. The base is fixed using the adhesive peel off strip and must be applied to a clean and dust free surface. Please use the Surface Primer to clean the surface (Part No. SP01).

Material:

UV stabilised polypropylene

SURFACE PRIMER

We recommend the use of a suitable Surface Primer (such as Norbond N2292) to clean the surface that the Adhesive Clip is being adhered to.

 

To request a quotation, select the version you require using the drop down options below.

Adhesive Clips (Circular conductor)

Adhesive Clips are used where no mechanical fixing method can be achieved or allowed. The base has a threaded hole and is supplied with a fixing screw to suit our Non-Metallic DC Clip. The base is fixed using the adhesive peel off strip and must be applied to a clean and dust free surface. Please use the Surface Primer to clean the surface (Part No. SP01).

Material:

UV stabilised polypropylene

SURFACE PRIMER

We recommend the use of a suitable Surface Primer (such as Norbond N2292) to clean the surface that the Adhesive Clip is being adhered to.

 

To request a quotation, select the version you require using the drop down options below.

Tape Clips Flat conductorTape Clips Flat conductor b

Tape Clips (Flat conductor)

Metal Tape Clips hold the tape flush to the surface and are fixed using two screws. They are only suitable for use with bare tape.

Material:

Copper to BS:EN 13601/ Aluminium to BS:EN 755-5 (formerly BS 1432)

 

To request a quotation, select the version you require using the drop down options below.

One Hole Cable Clips Circular conductorOne Hole Cable Clips Circular conductor b

One Hole Cable Clips (Circular conductor)

One Hole Cable Clips are a simple solution for solid circular conductors to flat surfaces.

Material:

Copper/Aluminium
High Copper Content Alloy

 

To request a quotation, select the version you require using the drop down options below.

Felt Pad Clip Bases

Felt Pad Clip Bases

Only use on bitumen roofing felt. Includes clip.

Material:

Roofing felt/polypropylene

 

To request a quotation, select the version you require using the drop down options below.

Flexible DC Clip BasesFlexible DC Clip Bases b

Flexible DC Clip Bases

Supplied with an M6 CSK screw for attaching the clip. Can be used with our DC Clip and Square Clamp ranges.

Material:

Polypropylene

 

To request a quotation, select the version you require using the drop down options below.

CLAMPS

Clamps are designed to bond either copper or aluminium conductor to flat metal surfaces or to connect flat and circular conductor to reinforcing bar and steel beams.

Square Clamps Flat conductor SQCAF253Square Clamps Flat conductor SQCCF253

Square Clamps (Flat conductor/hot stamped design)

BS62305 hot stamped design – NEW

Square Clamps are designed for a four way connection and are suitable for crossing over tapes, straight through joints or ‘T’ connections to form a continuous network of tapes. Countersunk hole in the base for fixing the clamp in place.

Material:

Aluminium/Copper Alloy

Standard:

BS:EN 62561-1, Class H

Tightening torque:

6Nm

Square Clamps permit neat joints on PVC covered conductors due to the recessed lid.

 

To request a quotation, select the version you require using the drop down options below.

Square Clamps Flat conductor Earthing Range SQCA253Square Clamps Flat conductor Earthing Range SQCC253

Square Clamps (Flat conductor/earthing range)

Square Clamps are designed for a four way connection and are suitable for crossing over tapes, straight through joints or ‘T’ connections to form a continuous network of tapes. Countersunk hole in the base for fixing the clamp in place.

Material:

Aluminium/High Copper Content Alloy/Gunmetal

Standard:

BS:EN 62561-1, Class H

Tightening torque:

6Nm

Square Clamps permit neat joints on PVC covered conductors due to the recessed lid.

 

To request a quotation, select the version you require using the drop down options below.

Square Clamps Circular conductorSquare Clamps Circular conductor b

Square Clamps (Circular conductor)

Square Clamps provide four way connection and are suitable for crossing over tapes and cables in straight through joints or ‘T’ connections to form a continuous cable network.

Material:

Aluminium/copper alloy

Standard:

BS:EN 62561-1, Class H

Tightening torque:

6Nm

 

To request a quotation, select the version you require using the drop down options below.

Square Clamps Flat to circular conductorSquare Clamps Flat to circular conductor b

Square Clamps (Flat to circular conductor)

Square Clamps provide four way connection and are suitable for crossing over tapes and cables in straight through joints or ‘T’ connections to form a continuous cable network.

Material:

Gunmetal

Standard:

BS:EN 62561-1, Class H

Tightening torque:

6Nm

Countersunk hole in the base for fixing the clamp in place.

 

To request a quotation, select the version you require using the drop down options below.

Tee ClampsTee Clamps b

Tee Clamps

Tee Clamps are designed for a three way connection.

Material:

Copper alloy/aluminium

Standard:

BS:EN 62561-1, Class H

Tightening torque:

12Nm

 

To request a quotation, select the version you require using the drop down options below.

Circular Conductor Joining and Tee Clamps SQCC08 MVCircular Conductor Joining and Tee Clamps SQCA08 MV

Circular Conductor Joining and Tee Clamps

Circular Conductor Joining and Tee clamps connect 8mm diameter conductor in straight or crossover configurations.

Material:

Copper/aluminium/zinc plated steel

Standard:

BS:EN 62561-1

 

To request a quotation, select the version you require using the drop down options below.

STANDING SEAM CLAMPS

Standing Seam Clamps are designed to allow the installer to secure Lightning Conductors to roofing sheets that use the Standing Seam construction.

Standing Seam Clamps KMFBALStanding Seam Clamps KMBAL-SQCAF253

Standing Seam Clamps (Aluminium)

Standing Seam Clamps are designed to allow the installer to secure Lightning Conductors to roofing sheets that use the Standing Seam construction.

Material:

Aluminium/Stainless Steel

Seam widths 16 – 30mm.

 

To request a quotation, select the version you require using the drop down options below.

Standing Seam Clamps KMFBSSStanding Seam Clamps KMFBSS-SQCCF253

Standing Seam Clamps (Stainless Steel)

Standing Seam Clamps are designed to allow the installer to secure Lightning Conductors to roofing sheets that use the Standing Seam construction.

Material:

Aluminium/Stainless Steel

Seam widths 16 – 30mm.

 

To request a quotation, select the version you require using the drop down options below.

TEST CLAMPS

Test Clamps are used to form a disconnecting joint between the Down Conductor System and the Earthing System.

Plate Type Test ClampPlate Type Test Clamp b

Plate Type Test Clamp

Plate Type Test Clamps are used to form a disconnecting joint between the Down Conductor System and the Earthing System. Conductors are secured by the top and bottom plates being clamped together.

Material:

Gunmetal

Standard:

BS:EN 62561-1, Class H

Tightening torque:

15Nm

Screw Down Test ClampScrew Down Test Clamp b

Screw Down Test Clamp

Screw Down Test Clamps join 25 x 3 conductor tape to facilitate annual testing of the Lightning Protection System.

Material:

Copper

Standard:

BS:EN 62561-1, Class H

Tightening torque:

20Nm

The heavy duty lid simply screws on and off the threaded base.

Oblong Test ClampsOblong Test Clamps b

Oblong Test Clamps

Oblong Test Clamps are designed to join conductor tape to facilitate in the annual testing of the Lightning Protection System.

Material:

Aluminium/Copper

Standard:

BS:EN 62561-1, Class H

Tightening torque:

15Nm

The heavy duty lid simply screws on and off the threaded base.

 

To request a quotation, select the version you require using the drop down options below.

Cable Test ClampsCable Test Clamps b

Cable Test Clamp

Cable Test Clamps are used to form a disconnecting joint between the Down Conductor System and the Earthing System. The conductors overlap end to end and secure together using two bolts.

Material:

Gunmetal

Standard:

BS:EN 62561-1, Class H

Tightening Torque:

6Nm

 

To request a quotation, select the version you require using the drop down options below.

Test Clamps Flat to circular conductor copperTest Clamps Flat to circular conductor aluminium

Test Clamps (Flat to circular conductor)

Test Clamps form a disconnecting joint between either 8mm and 8mm diameter conductor or 8mm and 25 x 3mm conductor.

Material:

Copper/Aluminium

Standard:

BS:EN 62561-1 Class H, BS 7430

Tightening torque:

12Nm

 

To request a quotation, select the version you require using the drop down options below.

HOLDFASTS

Slate, pyramid, glazing bar and back plate Holdfasts for securing clips and conductor to specialist surfaces.

Slate Holdfasts Flat and circular conductorSlate Holdfasts Flat and circular conductor b

Slate Holdfasts (Flat and circular conductor)

Kingsmill Slate Holdfasts are used for the installation of circular conductor tape above the roof tiles without the need for drilling holes.

Material:

Polypropylene clip/Aluminium tape

Standard:

Aluminium tape to BS:EN 755-5

The aluminium tail slides under the roof tile and is fixed to the wooden beam or tile batten using proprietary galvanised nails. The clip then protrudes from the tile and offers a fixing for the tape.

 

To request a quotation, select the version you require using the drop down options below.

Pyramid Holdfasts PHFBM6Pyramid Holdfasts PHFBM

Pyramid Holdfasts

Supplied filled with concrete. Lip around the base enables building in to bitumen type roofs.

Material:

Polyethylene

Standard:

BS:EN 62561-1, Class H

Glazing Bar HoldfastsGlazing Bar Holdfasts b

Glazing Bar Holdfasts

Glazing Bar Holdfasts are used to fix clips to glazing bars. Can be used with both metallic and non-metallic clips.

Material:

Gunmetal/Aluminium

 

To request a quotation, select the version you require using the drop down options below.

Back Plate Holdfasts

Back Plate Holdfasts

Back Plate Holdfasts maintain a set distance of 75mm between lightning conductor and the surface of the structure being protected (when required). Supplied with M6 CSK screw for attaching either Tape Clip or Square Clamp.

Material:

Copper Alloy/Aluminium

 

To request a quotation, select the version you require using the drop down options below.

BIMETALLIC CONNECTORS

Bimetallic Connectors connect aluminium conductor to copper earth conductor. They are a practical joining method without the need for tinning, riveting or wrapping around the joint.

Bimetallic ConnectorsBimetallic Connectors b

Bimetallic Connectors

Bimetallic Connectors are designed to connect aluminium conductor to copper earth conductor. They are a practical joining method without the need for tinning, riveting or wrapping around the joint.

Material:

Stainless Steel grade 303 (BM253HS/BM08HS/BM08253SS)
Copper/Aluminium fuse welded (BM253FC)

Standard:

BS:EN 62561-1, Class H

Tightening torque:

12Nm

We recommend the use of oxide inhibiting compound (UNP250) with Bimetallic Connectors.

 

To request a quotation, select the version you require using the drop down options below.

LIGHTNING STRIKE COUNTER

Lightning Strike Counters register direct lightning events. They have a long life and do not require a battery or external power.

Lightning Strike Counter

Lightning Strike Counter

Lightning Strike Counters register direct lightning events. They have a long life and do not require a battery or external power.

A sensitive response trigger current of only 500A can register very high lightning strikes up to 150kA 8/20μs. Lightning Strike Counters utilise a 6 digit mechanical count display and are IP67 rated for outdoor use.

Suitable for use with 8mm dia and 25 x 3mm conductors.

SCREWS & PLUGS

A range of fixings – screws and wall plugs – to facilitate the securing of Fittings to suitable surfaces.