Free-Standing Air Terminals

INTRODUCTION

The Kingsmill range of Free-Standing Interception Masts/Air Terminals are suited to the protection of roof mounted plant, for example chillers, solar panels etc.

These terminals are a simple solution to protecting roof mounted plant, when aesthetics are of less importance.

Free-Standing Air Terminal

Products

APPLICATIONS

FREE-STANDING MASTS

Free-Standing Air Terminals 1m–4m

Free-Standing Air Terminals (1m – 4m)

Free-Standing Air Terminals (1m – 4m) are suitable for wind speeds of 24-27m/s, 86.4-169.2km/h, 53.7-105.1mph. Each Free-Standing Air Terminal (1m – 4m) is manufactured from 16mm diameter aluminium and supplied with a stainless steel stabiliser and a concrete mounting block incorporating a mast to roof conductor connector.

 

To request a quotation, select the version you require using the drop down options below.

Free-Standing Air Terminals 4m–8m

Free-Standing Air Terminals (4m – 8m)

Free-Standing Air Terminals (4m – 8m) are suitable for wind speeds of 24-27m/s, 86.4-169.2km/h, 53.7-105.1mph

Each Free-Standing Air Terminal (4m – 8m) comprises:

• 1 x 16mm diameter aluminium air terminal
• 2 x 40mm diameter stainless steel mast and tripod bases
• 3 x 40kg concrete mounting blocks and
• 1 x mast to roof conductor connector

 

To request a quotation, select the version you require using the drop down options below.

Free-Standing Air Terminals 8m–10m

Free-Standing Air Terminals (8m – 10m)

Free-Standing Air Terminals (8m – 10m) are suitable for wind speeds of 24-27m/s, 86.4-169.2km/h, 53.7-105.1mph

Each Free-Standing Air Terminal (8m – 10m) comprises:

• 1 x 16mm diameter aluminium air terminal
• 1 x 25mm diameter stainless steel guyed mast
• 1 x 40mm diameter stainless steel guyed mast
• 1 x Stainless steel fivepod base
• 5 x 40kg concrete mounting blocks and
• 1 x mast to roof conductor connector.

 

To request a quotation, select the version you require using the drop down options below.

Roof Protection Pad

Roof Protection Pad

Roof Protection Pads fit underneath the mast mounting blocks to prevent damage to the roof surface from the bare Concrete Mounting Block.

Material:

Polymer Membrane

The top of Free-Standing Air Terminals could deflect under some wind conditions. This is due to the nature of their construction and  having smaller diameter mast sections.

These terminals require to be weighted down with concrete blocks and tripod structures. This may be problematic in terms of weight loading on some roofs, particularly when retro-fitting.

A reasonable amount of clear roof space is required to accommodate both the separation distance and tripod base.

For masts with a greater aesthetic, take a look at our range of Lightweight Lightning Masts.