Tools/Safety Equipment

INTRODUCTION

Kingsmill provide a range of products for effective bonding of electrically conductive components to the Lightning Protection System.

ACCESSORIES

Mould Types

Tools/Safety Equipment

Earth Points

Handle Clamps

A complete range of Handle Clamps for use with all KingsWeld graphite moulds.

Handle Clamp for use on D type mouldsHandle Clamps c

Handle Clamps

 

To request a quotation, select the version you require using the drop down options below.

Accessories

Exothermic welding must be used in accordance with instructions and with all safety precautions taken. This includes the use of personal protective equipment (PPE).

We run operator training courses to train field operatives on how to safely carry out an exothermic weld.

kingsweld exothermic welding safety accessoriesSafety accessories apron

Safety accessories

Exothermic welding must be used in accordance with instructions and with all safety precautions taken. This includes the use of personal protective equipment (PPE).
We run operator training courses to train field operatives on how to safely carry out an exothermic weld.

To request a quotation, select the version you require using the drop down options below.

Welding Toolkit

All essential safety and operational items to carry out an exothermic weld. Each toolkit (order KWTKIT) contains the items listed below:

Toolkit comprising: conductor cleaning brush, safety goggles, plastic tool box, spare flints, sealing putty, safety gloves, mould cleaning brush, minor burn kit, flint ignitor, safety apron (leather), earth rod driving cap (M16), handle clamp (cathodic protection), handle clamp (for type D moulds), handle clamp (for type E/F moulds), mould scraper (to suit C moulds), mould scraper (to suit D moulds) and mould support clamp

Exothermic welding toolkit

Exothermic Welding Toolkit

All essential safety and operational items to carry out an exothermic weld. Each toolkit (order KWTKIT) contains: conductor cleaning brush, safety goggles, plastic tool box, spare flints, sealing putty, safety gloves, mould cleaning brush, minor burn kit, flint ignitor, safety apron (leather), earth rod driving cap (M16), handle clamp (cathodic protection), handle clamp (for type D moulds), handle clamp (for type E/F moulds), mould scraper (to suit C moulds), mould scraper (to suit D moulds) and mould support clamp

Earth Points

A range of Earth Points are available to cover a variety of applications.

They are available with single, twin and four holes. Earth Points can also be supplied with, and without, plates to accommodate different conductors.

Single Earth Point with Tail

Single Hole Earth Points (with solid tail)

Single Hole Earth Points (with solid tail) provide bonding points to reinforcing bar.

Material:

Stainless Steel/Gunmetal

Standard:

BS:EN 62561-1 Class H, BS 7430

Tightening torque:

8Nm

 

To request a quotation, select the version you require using the drop down options below.

Earth Points (with green/yellow tail)

Earth Points (with green/yellow tail) provide bonding points to reinforcing bar.

Material:

Gunmetal, 70mm² 6491X green/yellow Copper Cable

Standard:

BS:EN 62561-1 Class H, BS 7430

Tightening torque:

8Nm

Can be used with bolted clamps or exothermic welds

To request a quotation, select the version you require using the drop down options below.

Pre-Welded Rebar Earth PointsPre-Welded Rebar Earth Points

Pre-Welded Rebar/Earth Points

Kingsmill can prefabricate pre-welded earth point/conductor/rebar connections.
This saves time on site.

Contact Customer Services for details and quotations.

Earth Point with Cover Plate

Earth Points (with cover plate)

Earth Points (with cover plate) provide a convenient bonding point to reinforcing bar.

Material: Gunmetal
Standard: BS:EN 62561-1 Class H, BS 7430
Tightening torque: 8Nm
Kingsmill earth points four holeTwo Hole Earth Point

Earth Points (without cover plate)

Earth Points (without cover plate) provide a convenient bonding point for bolted connections.

Material:

Gunmetal/Stainless Steel

Standard:

BS:EN 62561-1 Class H, BS 7430

Tightening torque:

8Nm

Earth Points (without cover plate) are available with 1, 2 or 4 holes. Manufactured from gunmetal (except for a stainless steel single hole option).

 

To request a quotation, select the version you require using the drop down options below.