CLAMPS AND ACCESSORIES

Rod To Tape Clamps U Bolt Single Plate Type

CLAMPS

Earth Rod Clamps are an important element in an earth termination network. They act by connecting the earth continuity and lightning down conductors to the driven earth electrode. It is very important that these products comply with standards and are made from a minimum of 80% copper (cast components) with either solid copper, phosphor bronze or stainless steel bolted components. This will then ensure resistance to corrosion as well as provide a low impedance connection. All finished joints should be wrapped in Denso tape to further inhibit corrosion.

Rod To Tape Clamps A Type

Rod To Tape Clamps (A Type)

Rod To Tape Type ‘A’ Clamps are designed to join various sizes of conductor tape to the earth electrode.

Material:

High Strength Copper Alloy (body), Stainless Steel or Phosphor Bronze (bolt)

Standard:

BS:EN 62561-1 Class H, BS 7430

Tightening torque:

15Nm

The clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

To request a quotation, select the version you require using the drop down options below.

Rod To Tape Clamps U Bolt Single Plate Type

Rod To Tape Clamps (U Bolt Single Plate Type)

Rod To Tape Type ‘U’ Bolt Single Plate Clamps are designed to join various sizes of conductor tape to the earth electrode.

Material:

High Strength Copper Alloy (body), 99.9% HD Copper (‘U’ bolt)

Standard:

BS:EN 62561-1 Class H, BS 7430

Tightening torque:

12Nm

The clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

To request a quotation, select the version you require using the drop down options below.

Rod To Tape Clamps U Bolt Double Plate Type

Rod To Tape Clamps (U Bolt Double Plate Type)

Rod To Tape Type Clamps (U Bolt Double Plate Type) join 25 x 3 conductor tape to the earth electrode/rebar without the need to drill the tape.

Material:

High Strength Copper Alloy (body)
99.9% HD copper (‘U’ bolt material)

Standard:

BS 7430

Tightening torque:

12Nm

The clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

To request a quotation, select the version you require using the drop down options below.

Rod To Cable Clamps JAB Type

Rod To Cable Clamps (JAB Type)

Rod To Cable Clamps (JAB Type) are used to join various sizes of cable to the earth electrode.

Material:

High Strength Copper Alloy (body)
Stainless steel/phosphor bronze (bolt – see product options)

Standard:

BS:EN 62561-1 class H, BS 7430

Tightening torque:

12Nm

The clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

To request a quotation, select the version you require using the drop down options below.

Rod To Strand Clamp

Rod To Strand Clamp

The Rod To Strand Clamp connects Earth Rods to stranded conductor.

Material:

Bronze (body), 99.9% HD Copper (‘U’ bolt)

Rod to Cable Clamps GUV TypeRod to Cable Clamps GUV Type c

Rod to Cable Clamps (GUV Type)

Rod to Cable Clamps (GUV Type) are designed to join various sizes of cable to earth electrodes/rebars etc. They have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

Material:

High Tensile Copper Alloy (body)
99.9% HD Copper (‘U’ bolt)

Standard:

BS:EN 62561-1, Class H

Tightening torque:

12Nm

 

To request a quotation, select the version you require using the drop down options below.

Rod To Cable Clamps Keyhole TypeRod To Cable Clamps Keyhole Type b

Rod to Cable Clamp: Keyhole Type

Rod To Cable Clamps (Keyhole Type) are designed to join various sizes of compression lugs to the earth electrode. They have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

Material:

High Tensile Copper Alloy (body)
Stainless Steel or Phosphor Bronze (bolt – see product options)

Standard:

BS:EN 62561-1 Class H, BS7430

Tightening torque:

12Nm

 

To request a quotation, select the version you require using the drop down options below.

ACCESSORIES

Tinmans Solder

Tinmans Solder

Tinmans Solder is used to braze copper bar and tape.

Material:

Tin (60%), Lead (40%)

Denso Tape

Denso Tape

Denso Tape offers a weatherproof seal when wrapped around joints to stop the ingress of moisture, preventing corrosion.

Material:

Synthetic – impregnated and coated with a neutral petroleum
compound

Inteltrox Oxide Inhibiting Paste

Inteltrox Oxide Inhibiting Paste

Inteltrox Paste assures a high conductivity joint by sealing out air and moisture for prevention of corrosion and reformation of oxide film. Supplied in a squeezy bottle with a resealable plastic cap.

Recommended for use on aluminium to copper connections, bare conductors or bus bar.

Silfos

Silfos

Silfos allows copper to be brazed in air without the use of flux.

Material:

Silver, phosphorus and copper alloy